Everything you need to know about your lovely 3D printed lamp:
|
COMPONENTS
|
TECHNICAL SPECIFICATIONS
|
|
• LED wooden base
• Acrylic panel
• USB cable
|
Base material: Wood
Light plate material: acrylic
Power mode: USB
Wall charger is NOT included. Any USB charger will work just fine.
Light source: LED
Light color: monochrome warm light
Input voltage: 5V
Dimensions: 6” x 8” (15cm x 22cm) (including the wood base)
|
HOW TO USE:
- Remove the protective brown seal from both sides of the acrylic plate.
- Place the acrylic plate in the base.
- Plug in the USB cable to the computer/power supply (ie:wall charger).
- Press the power button to power the lamp on.
Please watch below video for details:
IMPORTANT
- Please use a soft cloth to clean the acrylic panel if there is a mark on the surface. Do not use abrasive cleaners as will damage the surface
- Always switch the lamp off overnight or if left unattended.
- What to do if the light doesn’t work?
- Check if you have turned it on
- Check if the cable has been plugged properly
- Check if the wall charger is working well
- If none of the above suggestions work, please contact us at support@trendingcustom.com
WARRANTY:
- Warranty period: 45 days since delivery
- Coverage of Warranty:
- The product doesn’t work upon arrival (i.e: can’t turn on the light, missing the LED light, etc)
- Broken due to shipping
- We will not warrant for causes that are not due to the fault of the manufacturer or shipping carriers.
- How to get a warranty: contact us at support@trendingcustom.com
